Inductive loads are motor loads (horsepower loads), and magnetic (coils, electromagnetic) loads. Resistive loads are non-motor loads that have a resistance, like incandescent lighting, or heating loads.

Electrical wirings are best done by a professional electrician so it is highly recommended to consult one. 

The YOSWIT Wall Switch have a dimmer and compatible with a three-way multi-location control switches. You can choose them on the product pages.

The above situations occur due to the low loading of lighting or non-support bulb type. You may:

• place an resistor at two sides of any one bulb, or
• replace any one bulb of any one gang either into tungsten lamp or compact fluorescent lamp in series, or
• adopt Live & Neutral Wiring method

You may re-connect the product and Bluetooth by one click on"Restart" button.

You may reset it by press and hold the "Reset" button for 5 seconds. Then reset a new password via YOSWIT App.

The main situations which may cause Remote Access failure is your device are out of the Bluetooth signal range.

When firmware updates are available, an alert will be displayed on the App to update the device to the latest firmware.

Yes. Bluetooth connection issues will not affect rules that are stored on the app.  It will only affect Remote Access.  Meaning, the rules that you have set up will still function.

Through our Mob-Mob App. Controlling your network is not just limited to one device.  To know more on how you can control your network, click here.